Anime and Manga Forum

Tamiya 1/32 mini 4WD Hurricane Sonic Premium (AR chassis) 19441






[Premium specification with AR chassis for improved driving performance]
This is a plastic model assembly kit of a high-performance racer that uses shaft drive four-wheel drive.
Hurricane Sonic Premium is a premium version of Hurricane Sonic, the third machine of Retsu Seima, one of the main characters of the mini 4WD manga ``Bakusou Kyoudai Let's & Go!!''.
The body is white in color and features a wing attached to connect the left and right front cowls, and a large rear wing with three tiers of small flaps.
The red and green graphics that tighten the form are available as metal stickers.
The AR chassis has a monocoque structure with high strength.
The main body is made of metallic gray ABS resin, and the under panel, diffuser, and rollers are made of red low-friction resin.
The yellow 5-spoke wheels are fitted with low-height tires with a diameter of 26mm.

[AR chassis]
The AR chassis not only pursues aerodynamics, but also has the elements necessary for mini 4WD racing, such as maintainability, rigidity, and expandability.
Equipped with an air intake for the battery and motor, the inside of the chassis is efficiently cooled by the running wind and prevents power down due to heat.
Another point is that it is equipped with a plastic bearing made of low-friction resin to reduce drive loss and reduce weight.
The under panel and diffuser can be removed with one touch, and batteries and motors can be replaced without removing the body.
Additionally, a rear skid bar is standard equipment.
When passing through a slope course such as a slope section, the low-friction resin skid bar comes into contact with the course road surface to control the machine's posture and prevent it from going off course.
With 3.5:1 super speed gear.

[Basic specifications]
Total length when completed: 155mm
Overall width 97mm
Overall height 40mm
with motor
Assembly is a snap-in type that does not require adhesive

[What to purchase separately]
2 AA batteries

Shipping
All products are official and authentic.
Of course, everything will be shipped from Japan.

---Economy International Shipping---
 Japan Post Air mail  No tracking number  7-14 days

---Standard International Shipping---
 Japan Post Air Registered mail No tracking number 7-14 days
(Confirmation signature required on receipt)

---Expedited International Shipping---
 DHL or Fedex  With tracking number 3-7 days

We will ship within 7 business days of receiving the payment.

Payment
We only accept payments via eBay Manage payments
Accepted payment methods
PayPal
Visa
Mastercard
Apple Pay
Google Pay

International Buyers - Please Note
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
Please check with your country's customs office to determine what those additional costs will be prior to bidding or buying.
Customs fees are normally charged by shipping companies or collected when you pick up the item. These fees are not additional shipping charges.
If a remote shipping fee is incurred, we may charge a separate shipping fee.

Thank you for your understanding.


Buy this item

1/10 RC Aluminium Alloy Carbon Shaft Drive Touring Car Frame for TAMIYA TT01 RC













Product Description

Note:

1.The frame material is metal + plastic combination.

2.If you need an all-metal frame, you can look for accessory upgrades at the store.

3. This is not original Tamiya product, and it is only a kit, without any electronic device.

4.This product has 2 batches, sent randomly, the same function does not affect the use.


Specifications:

1.Overall length: 400mm, Width: 150mm

2.Black carbon fiber chassis

3.Four pcs steel metal drive shaft

4.Full frame install bearing

5.CNC metal motor seat

6.Metal transmission case seat

7.Come with 4pcs of wheels


it's a almost assembled finished version, you just need install battery and electronic accessories for run.


Required Items (not including)

1. R/C Unit: 2or3 channel R/C radio system

2. Battery: 2S lipo or 6- cells NiMH/NiCd

3. Speed controller & Motor

4. Body shell


Package includes:

1Set TT01 touring car kit（Batch random）


Buy this item

Tamiya 2009 Buggy Champ 1/10 Off-Road 2WD Buggy Kit [TAM58441-60A]






The Kit That Started the "Buggy Boom" In the 70s and 80s

The re-released 2009 Buggy Champ 1/10 Off-Road 2WD Buggy Kit is a nostalgic journey back to the roots of RC off-road racing, capturing the essence of the original "Buggy Boom" that started in 1979. This revamped version not only pays homage to the classic design but also incorporates modern improvements for an unparalleled experience. The realistic scale-molded body, die-cast metal and clear resin fully enclosed gearbox, and metal roll bar contribute to the authenticity of the Buggy Champ. The inclusion of a transparent mechanism box not only protects the mechanics and battery but also adds a unique visual element, allowing enthusiasts to appreciate the intricate workings of the model.

What sets this retro buggy apart is its meticulous attention to detail and quality construction. The chassis features a 2mm thick FRP plate with an aluminum reinforcing plate, providing a perfect balance of strength and flexibility for stability during aggressive driving. The 4-wheel independent suspension, with front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers, ensures optimal performance on various terrains. The inclusion of full ball bearings minimizes friction loss, while the grooved front and rear tires with a block tread pattern offer superb off-road capabilities. This kit is not just a collector's item; it's a must-have for retro buggy enthusiasts, racers, and admirers who appreciate the blend of vintage design and modern performance.

For retro buggy collectors and racers, the 2009 Buggy Champ stands out as a special addition to their collection due to its authenticity and the incorporation of contemporary features. The metal oil-filled shock damper, die-cast metal suspension arms and uprights, and the option to choose between two gear ratios (6.5:1 or 9.3:1) provide versatility for different driving preferences. The kit's completeness, including the 1060 Hobbywing ESC and a 540 motor, makes it an attractive package for those eager to revive the classic buggy experience. With an assembly level marked as an unassembled kit, it also offers the joy of building and customizing the buggy to one's specifications. To complete the package, the list of needed items, such as a 2-channel transmitter/receiver system, steering servo, battery, and compatible charger, is provided, ensuring that enthusiasts have everything required for an authentic and enjoyable retro off-road racing experience.

NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

    Realistic scale molded body
    Die-cast metal and clear resin fully enclosed gearbox
    Die-cast metal suspension arms and uprights
    Metal roll bar
    Metal Oil Filled shock damper
    Fully Independent front and rear suspension
    2mm thick FRP chassis plate with an aluminum reinforcing plate
    Front double trailing arm and rear swing axle setups
    Includes full ball bearings

Specifications:

    Scale: 1/10
    Length: 400mm
    Width: 210mm
    Height: 150mm
    Wheelbase: 250mm
    Weight: 1730g
    Drivetrain: 2WD
    Gear Ratio: 6.5:1 or 9.3:1
    Terrain: Off-Road
    Power Source: Electric
    Assembly Level: Unassembled Kit

Includes:

    (1) 2009 Buggy Champ 1/10 Off-Road 2WD Buggy Kit
    (1) 1060 Hobbywing ESC (2-3S)
    (1) 540 motor

Needed to Complete:

    (1) 2-Channel Transmitter/Receiver System
    (1) Steering Servo
    (1) 2S (7.2V-7.4V) Battery
    (1) Compatible charger
    Paint for body


Buy this item

Tamiya 58719 1/10 RC BBX High Performance 2WD Off-Road Buggy

















Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match!

Key Features:

• 1/10 R/C assembly kit. Length: 414mm, height: 136mm, width: 233mm. Wheelbase: 283mm.
• The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy.
• NEW: Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies.
• The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance.
• The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction.
• The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look.
• Transmission uses the TA06 rear ball differential for consistent traction and may be outfitted with the separately sold TA-06 oil-filled gear differential which allows the use of many existing Grade-Up parts.
• Features full ball bearings and universal drive shafts.
• Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor.
• NEW: New metal-plated bead lock type wheels are paired with NEW large-diameter tires.
• Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. (Spare tire may be purchased separately for added realism)
• Requires 2-channel radio, LOW-PROFILE steering servo (Example Dimension: 40.5 mm x 20 mm x 25.4 mm
1.59 in x 0.79 in x 1.0 in, 540) motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

• NOTE: Battery compartment accommodates a square shaped LiPo 2S battery.

 

SPECIFICATIONS
Adjustable Gear Ratio Yes
Bearings Includes full ball bearings
Body Material Polycarbonate
Body Stickers Included
Chassis Material FRP Fiberglass Reinforced Plastic
Chassis Type BB-01
Construction Type Assembly Kit
Differential Type Gear
Drive Type 2WD
Electronic Speed Control (esc) Sold Separately
Led Lights Sold Separately
Motor Sold Separately
Required To Complete 2-channel radio, LOW-PROFILE steering servo (Example Dimension: 40.5 mm x 20 mm x 25.4 mm 1.59 in x 0.79 in x 1.0 in, 540), ESC, 7.2-7.4volt battery & battery charger, and Tamiya PS paint.
Scale 1/10
Shock Damper Aeration oil-filled
Suspension Fully independent wishbone front with independent trailing arm rear
Terrain Use Off-Road


Buy this item

Tamiya 58696 1/10 RC 4WD Off-Road Racer TD4 Chassis Super Avante Buggy Kit















Tamiya’s designers have crafted the next fun to drive 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, “Being Nuts is Neat!” And, the front of the all-new TD-4 chassis, shares a front horizontal damper layout design, similar to the original Avante, except, this time around, the front dampers are underneath the body. The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products.

TD4 - Low Profile, High Performance
The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.

• 1/10 R/C assembly kit. Length: 338mm, height: 124mm, width: 246mm. Wheelbase: 283mm.
• Polycarbonate body (inspired by the Tamiya classic, Avante) is designed by Japanese designer Kota Nezu of Znug Design.
• Newly designed shaft-driven 4WD chassis based on a one-piece monocoque frame. It features the same ball differentials for front and rear, and features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance.
• The TD4 chassis also employs a front inboard suspension layout which eliminates the need for a front damper stay and offers slim, low-profile form.
• The four-wheel double wishbone suspension system uses CVA oil dampers for fun performance.
• Features full ball bearings.
• Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup.
• Turnbuckle shafts for use with upper arms facilitate camber angle adjustment.
• Star dish wheels are paired with square spike tires which offer good grip off-road.
• Choose between high and low type wing stays to adjust the downforce depending on the road surface.
• Comes with a driver figure for extra realism, and high-torque servo saver.
• Requires: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint to complete.

SPECIFICATIONS
Adjustable Gear Ratio Yes
Bearings Includes full ball bearings
Body Material Polycarbonate
Body Stickers Included
Chassis Material FRP Fiberglass Reinforced Plastic
Chassis Type TD4
Construction Type Assembly Kit
Differential Type Ball Pressure Plate
Drive Type 4WD
Electronic Speed Control (esc) Not Included
Motor Not Included
Required To Complete 2-channel radio, steering servo, ESC, Motor, 7.2-7.4volt battery & battery charger, and Tamiya PS paint.
Scale 1/10
Shock Damper CVA Oil Filled
Suspension Fully Independent Double Wishbone
Terrain Use Off-Road


Buy this item